FAN CONTROL ON CUMMINS INSITE

09:16 AM 13/06/2023

FEATURE DESCRIPTION This feature controls an OEM supplied fan that is installed to meet the needs of vehicle and engine systems that rely on fan cooling for proper operation. This feature enables the ECM to turn the fan on or off in response to any of the following inputs: Engine operating conditions (coolant temperature, intake manifold ..

IDLE SHUTDOWN ON CUMMINS INSITE

10:20 AM 13/06/2023

FEATURE DESCRIPTION This feature shuts down the Engine after a period of Engine idling and no driver activity, reducing the amount of fuel burned and increasing Engine life. Before the shutdown occurs, a flashing lamp warns of an impending shutdown. The driver can override shutdown by depressing the service brake, clutch, or accelerator pedal during ..

INJECTOR CALIBRATION ON DDDL 6.5xx

03:38 PM 04/07/2023

Injector (DDEC III, IV, and DDEC V only) To set new Calibrations for the Injectors (for example, after new Injectors have been fitted) 1. Connect DETROIT Engine (60 Series) using DDDL 6.5xxx 2. Choose Injector from the Calibration menu to display the Injector Calibration dialog box. The dialog box will show the current Injector Calibration values ..

INJECTOR RESPONSE TIMES ON DDDL 6.5xx

04:09 PM 04/07/2023

The EUI (Electronic Unit Injector) uses a Solenoid operated valve to control injection timing and metering of the fuel and controlled by the ECU. Fuel injection begins when the Solenoid valve is closed. The valve closing point known as the Injector Response Times, is also returned to the ECU. This information is used to monitor and ..

News category

News watch much

test

test..

Please fill in the form below, so we can provide you with an up-to-date information about our new arrivals.