Cumming Caltem 5.9.0.029+Metafile

100100240 reviews

Status: Stocking

Price:

$

Add To Cart

With Cumming Calterm you can upload, download calibration file on Cumming Engines, intervene, modify, change parameters, remove engine speed limits, calibrate fuel, delete emissions like Adblue, DPF, remove EGR, DTC delete, increasing power. In short, it’s call Tuning Cumming Engine.

100

1. What is Cumming Caltem?

Cumming Catem is an intensive engineering development software for ECM of Cumming Engines, in a sense Caltem is specialized software for Tuning Cumming Engines.

With Caltem, you can adjust any engine parameters that Cumming Insitee software cannot do, in addition you can easily upload, download engine calibration file, remove the engine speed limit, calibrate fuel, delete emission like Adblue, SCR, DPF, cut EGR, increase power for Cumming Engines.

2. Software Information

  • Name: Cumming Caltem
  • Version: 5.9.0.029
  • Size: 173.2 MB
  • Level: Engineering Level
  • Market: All Market

 

2.1. Supported Engine Model

Cumming Catem software supports any vehicle using a Cumming Engine, including Engines from Russia and China.

  • Car
  • Trucks, tractors, construction machines
  • Generator
  • Marines
  • And many other lines

A new version of Caltem 5.9.0.029 has been released. This release includes the following features and bug fixes.

Following are the release contents for Caltem v5.9.0.029:

New Engine Product Support

  • BQY, BQX, BQW, BQV, BQU, BQS, BQT, BQR, BRD, BRE, CSR, BRB, BQE, BQG, BQJ, BQM, BQN, BRC

 

2.2. New Features

  • OTT - Console Window to display communication with ECM over UDS protocol
  • Support multi-channel datalink adapter
  • Cal compare CLI support for CSAR
  • Added provision to display 2-byte and 3-byte PCode in Fault window.
  • Added calibration information to the calibration download log file
  • Display units along the axis of tables and table units - both Core2 and CSAR
  • Provide Auto Reconnect functionality in When using Unlock tool in Calterm
  • Add a new CCSH interface to start monitoring with fault logging for a CSAR module

2.3. Critical Fixes and Improvements

  • 9290565 - Overlay's "Back" button should reset options as per selected overlay mode
  • 8710016 - Calterm crashes when running CCSH, Calterm for more than 10 hours
  • 9313519 - Tool is not reading range limits correctly for a parameter
  • 9387857 - Multi dimensional arrays elements arrangement in cdfx export
  • 9376613 - please provide the ability in Caltem to ignore if there is a space at the end of the parameter name
  • 9290570 - Change the name “Range Limit Options” to “Range Limit Settings” in overlay
  • 9271045 - Unblock All Faults are adding blocked selected faults twice in a fault list
  • 9369007 - Requesting to display the A2 cell log file in standard date and time format
  • 8996290 - Automatic Modue connection is not removing previously detected ECM information after detecting.
  • 9149052 - CSAR - Caltem Cal Compare incorrectly displays axis names/labels for 'Val_Blk' parameters
  • 9452206 - Caltem exports Hex values into .cdfx as enumerations
  • 9447068 - Display units along the axis of tables and table units - both Core2 and CSAR
  • 9373148 - Caltem Crash issues on 5.8.0.020 UAT build
  • 9437946 - CSAR overlay issue with table parameters in Calterm
  • 9310218 - while detecting module, Caltem shows the error mesage "object refernce not set to an instance of an object" in event log
  • 9264072 - Add a new CCSH interface to start monitoring with fault logging for a CSAR module
  • 9310232 - Event log continuouly updating for the fault codes for OTT connection

 

 

  • 9495886 - Caltem Crash on 5.8.0.027
  • 9208919 - Caltem Save Screen Prompt not appearing
  • 9103275 - Display all DTC fault types in Extended fault view in Calterm
  • 9534184 - Caltem - Divide Option has issue with the Subfile changes
  • 9677037 - Add Calibration file Name & path in Calibration download reflash log
  • 9753419 - Provide Auto Reconnect functionality in When using Unlock tool in Calterm.
  • 9813344 - CLI overlay report a status of the overlay success or fail
  • 9753483 - Caltem 5.8 fails to overlay the C_CAN2_Configuration value
  • 9728529 - Unlock Tool does not work for CM2450E/H/J series.
  • 9833750 - Integrate CSAR Files Types (a2l, hex, cdfx) to The Caltem Command Line Interpreter Compare Feature.
  • 9810061 - Make links accessible from the pop up itself
  • 9708598 - Old .cbf is not deleted automatically while connecting through calterm through Open Module.
  • 9708588 - Caltem 5.8 is still using old .cbf files even with " Keep Auto- generated cbf file after being used by calterm "  check box off
  • 9673379 - Execution result is not checked for Set SessionAccess() for UDS
  • 7851377 - Please provide the ability in CCSH to select a channel to connect with ECM
  • 7851392 - Caltem does not properly support RP1210 channel selection for devices when connecting to an ECM.
  • 9235811 - Multiple Channel Selection option broken
  • 9943513 - Support UDS Operations hex response & request in ConsoleView
  • 10031908 - Engineering range limits warning is not showing correct message for x/y axis values.
  • 10065454 - The Save button is not available for UDS protocol
  • 9022831 - Test Cell users  requested  not to display the pop up when REL change lock is requested from ASAM and don't want changes to be saved
  • 8810022 - Cannot monitor the parameter FuelInjRef.ppFuelSysCmdStruct.deStruct.FsCylStruct[0].FuelSoiVect[0:0] using Caltem-ASAM
  • 10303752 – Caltem 5.8 is having  reconnection issue and intermittent crash issue after key cycles
  • 10293518 - Need to performe double click to select check box.
  • 10293655 - How to used commands tab from fault information windows.

 

2.3. Computer Requirements

  • Ram: 4 GB
  • Free hard drive: 5 GB
  • Windows® 10 64-bit
  • Windows® 11 64-bit

2.4. Supported Hardware

  • Inline (Version 5, 6 or 7)
  • Nexiq USB Link (Version 1 or 2)
  • DG Technology DPA5
  • Norgone DLA
  • And some other RP1210 devices

Why do you need to use Cumming Caltem?

There are also many diagnostic devices available that assist accessing Cummins software. However, these devices almost only support basic features, it is impossible to implement the advanced features like Cumming Caltem. Cumming is one of the engines that is quite comfortable providing software that supports the Tuning ECM feature. With Caltem, you can virtually intervene 100% in ECM software if you know how.

If you think you can use WinOLS to completely delete emissions of Cumming Engines then you are wrong, a lot of ECM models you cannot use WinOLS successfully.

Who should use this software?

  • Technicians and repairman specialize in Cumming Engines

  • Engineer Cumming

  • Cumming Engine software in-depth researcher

Quick remote installation service

You are concerned about your computer skills or software installation skills that cannot install this software yourself. Don’t worry, VietVehicle.org team will assist you, we provide remote software installation service for you, make sure the software works ok as long as your computer has a stable Internet connection and Teamviewer software installed, all the rest we will do for you all, you can go to bed or do other tasks. After waking up the software has been installed and you are ready to start your work. 

In case you can install by yourself and want to buy full software (Includes KG), choose the Installation Option: Full Software/ Install byyourself (only apply on some software)

Are you concerned about risk after payment?

We know you are concerned about the prepayment, receive the software later. Don’t worry, you should use Paypal and remember to choose a payment method Pay for goods or services, you will be guaranteed safety by Paypal.

It is a form of assurance that gives you peace of mind, but in fact you will never need Paypal to resolve a dispute, because we would not be foolish to exchange a Vietvehicle.com brand that we have built it. When there was bad feedback, our Paypal account was also locked. And will affect our brand. So if the case does not support you, we are ready to Refund the money you sent us.

Please refer: Refund policy.

After-sales support policy 

You are concerned the software error when using. You worry that you can not fix it yourself. You worry that it will take a long time affecting your work and many other problems.

We fully understand these issues by you. And to ensure the interests of customers, we have a clear policy on this matter, please refer to: After-sales support policy.

Are you concerned that you will not know how to use the software?

If you are newbie, you can refer to our videos on our Youtube Channel or Facebook. We regularly upload video instructions to test the vehicle or perform the functions of programming and DPF SCR delete. Is it important that you take the time and effort to learn?. There are many tutorials, and many videos and documents that are completely free. 

Also, if you need us to do it for you, check out: Remote Tuning Service.

Shopping Guide

You are still wondering, do not know the purchase procedure, the payment methods or how to receive the products … Please refer: Shopping Guide.

 

  • Point rate*
  • Full name*
  • Title

Content rated

  • Content*


Related products

Buying products at VietVehicle will be supported

Please fill in the form below, so we can provide you with an up-to-date information about our new arrivals.